Skip to main content

Virtual Machine doesn't start, stuck at "PCI2.10 PnP PMM"

Another day another problem, I was setting up a lab environment, after creating a Virtual Machine using Virtual Machine Manager, My machine would get stuck here and never move:
SeaBIOSversion 1.9.1-5.el7_3.2) Machine UUID ... iPXE ( 00:03.0 C980 PCI2.10 PnP PMM
The error seemed to suggest there was something wrong with my NIC card as the Virtual Machine would boot if i disabled Network. I even tried it with a new NIC card but i kept getting stuck here.

Turned out that I didn't enable Virtualization in BIOS. Please make sure Virtualization is enabled before creating a Virtual Machine.

I am still wondering how I was able to create a VM without a Network.


Popular posts from this blog

ASUS RT N16 + OpenWRT + nodogsplash = WiFi Hotspot (For beginners)

1.Make sure you are directly connected to the router through a cable ·Take an ethernet cable from your ASUS modem and plug it into your pc/laptop
2.Now access your modem by going into the browser and typing: ·Go to administration tab and click on Firmware upgrade/update NOTE: Please use internet explorer for all of these configurations. There are some issues reported in other browsers. 3.You will have to load a DD-WRT basic image first to load the openWRT image. You cannot directly load openWRT image for some reason I dont know of ·Download the image by clicking on the link:
4.Once the image is downloaded just click on browse on the ASUS firmware upgrade page and browse to the DDWRT image and upload it

How to Install GTK-RecordMyDesktop on RHEL 7 (best screen recording software imo)

If you want to record your screen to make tutorials or something else, GTK-recordmydesktop is capable of doing it. Most of the screen-recording programs that I have come across requires you to record your audio separately, however this software is also capable of recording audio without any extra step. It can also work with JACK audio server.

PART 1 - Install EPL repository for RHEL 7:
Open a terminalInstall epel using the following command: yum -y install epel-release.Refresh repo by typing the following commad: yum repolist.PART 2 - Install GTK-RecordMyDesktop: yum install gtk-recordmydesktop That's it, it should work right away. If it doesn't, it is possible that you might be missing some codecs as I installed them from nux and epel repos earlier.

Create isolated network on Virtual Machine Manager - Centos 6.5

Since most of the Linux administration practice is done in a virtual environment, I thought I should create a video about it, as I am aware that some students at my college struggle with it in their labs. Please let me know if I missed anything or did not explain anything clearly.